IKMH-4A

IKMH4A is an active line array speaker designed to deliver incredible sound pressure packed in very reduced size and applicable in the situation where the space is very reduced.

IKMH4A is designed for large-size venues. It has very high power/size ratio thanks to its construction.
It is ideal for Large venues, Theatres, Large Concert Halls, etc.
It uses “Powersoft” amplification and our DSP.
Low-Mid section contains twelve 8” speakers, Mid-High section contains five 1,75” compression drivers summing in total 4000W of power.

  • Large-Size venues.
  • Indoors and Outdoors concerts.
ACOUSTICS
POWER HANDLING3600W + 400W
MAX POWER5000W + 700W
IMPEDANCE12X8 OHMS  +  5X16 HOMS
COVERAGEH 120º  V 20º
FRECUENCY RANGE100 Hz – 20 Khz  +/- 3dB
SPL 1W/1MT105 dB ( low-mid ) 113 dB ( higt )
MAXIMUM SPL133 dB CONTINUOS – 139 dB PEAK
CROSS OVER
TYPEDSP CONTROLLED PRESET SPEAKERS
FREQUENCY1,2 KHz MINIMUM
TRANSDUCERS
LOW – MID FREQUENCY12X8” NEODYMIUM
HIGH FREQUENCY5X1,75” NEODYMIUM
AUDIO INPUT
CONNECTORSMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1 = GROUND  /  PIN2 = HOT  / PIN3 = COLD
AUDIO OUTPUT
CONNECTORMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1+ = CH1+  /  PIN1- = CH1-  / PIN2+ =N.C.  / PIN2- = N.C.
POWER INPUT
CONNECTOR1 X POWERCON IN   1x POWERCON OUTPUT
AMPLIFIERS
TYPE1 MODULE CLASS D – DSP CONTROLLED
SUBWOOFER POWER500 WATT X 8 CH
PROTECTIONSDYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS
AC POWER
OPERATING RANGESTANDARD 210 – 240 Vac 50Hz ( STANDARD )
MAX CONTINUOS AND BURST CURRENTSTANDARD 12A (>10SEC) – 24A (>1 SEC )
PHYSICAL
MEASURES112 X 60 X 18 CM
WEIGHT53 Kg

For any support or additional information, please go to our “Contact” section.

Similar Products