MAK FULL ZERO

Much more that an ordinary Full Range speaker

Our FULL ZERO speaker is very difficult to classify. It is an active, Full Range speaker designed with a very special purpose. Mainly, it was designed to offer clear sound, high power and exceptional bass response in applications where the use of subwoofers is not available or not recommendable. We are confortable to say that it is one of the few REAL Full Range speakers on the market. Its sound covers the whole range delivering clear and powerful performance produced by its 12” Neodymium speaker and one 2,5” HF driver.

Two channel “Powersoft” amplification is permitting use of an additional passive subwoofer of up to 1000W, thanks to its speakon connector at the back-panel, adding more power to the system.

4 different presets, controlled by our DSP, are assuring accurate performance in a variety of configurations and applications.

4 presets are prepared for:

  • Clear Sound 60 Hz-16KHz
  • Monitor Sound 60Hz-16KHz
  • Full Sound 60Hz-16KHz
  • Sub Sound   Low 35Hz-100Hz / Mid 100Hz-1,8KHz / High  1,8KHz-16KHz

Full Zero in the conjunction with the subwoofer doesn’t need any additional processor. It is complete, stand-alone system controlled by its own DSP.

ACOUSTICS
POWER HANDLING1.000W + 80W
MAX POWER1050W + 1050W
IMPEDANCE1 x 8 OHMS + 1 x 8 HOMS
COVERAGEH 60º V 40º
FRECUENCY RANGE40 Hz – 20 Khz +/- 3dB
SPL 1W/1MT128 dB ( low-mid ) 129 dB ( higt )
MAXIMUM SPL131 dB CONTINUOS – 134 dB PEAK
CROSS OVER
TYPEDSP CONTROLLED PRESET SPEAKERS
FREQUENCY1,2 KHz MINIMUM
TRANSDUCERS
LOW-MID FREQUENCY1 x 12” NEODYMIUM
HIGH FREQUENCY1 x 2,5” NEODYMIUM
AUDIO INPUT
CONNECTORSMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1 = GROUND / PIN2 = HOT / PIN3 = COLD
AUDIO OUTPUT
CONNECTORMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1+ = CH1+ / PIN1- = CH1- / PIN2+ =N.C. / PIN2- = N.C.
POWER INPUT
CONECTOR1 X POWERCON IN 1x POWERCON OUTPUT
AMPLIFIERS
TYPE1 MODULE CLASS D – DSP CONTROLLED
POWER2 x 1050 WATT @ 8 CH
PROTECTIONSDYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS
AC POWER
OPERATING RANGESTANDARD 90 – 265 Vac 50Hz ( STANDARD )
MAX CONTINUOS AND BURST CURRENTSTANDARD 12A (>10SEC) – 24A (>1 SEC )
PHYSICAL
DIMENSIONS75 x 35 x 22 cm
WEIGHT30 Kg ( 77 lbs )

For any support or additional information, please go to our “Contact” section.