MAK10A is satellite, multi-purpose active speaker with very compact design and high performance. It contains one 10” speaker and two 1,75” high frequency drivers. Thank to its compact design, small size, low weight and flying accessories, it is an ideal speaker for a variety of applications.

Our satellite speaker MAK10A is an ideal solution for middle-size venues, concert halls and discotheques. Together with our IKS18 subwoofer it makes an ideal and very portable PA system adaptable to many different types of venues.

It could be used as a part of a line array, stand-alone speaker mounted on pole mount or floor monitor.

It is equipped with “Powersoft” Class D amplifier with 2 x 700w and our DSP, controlling EQ, Compression, Limiting and other important parameters assuring the best performance and components protection.

The passive version of this speaker could be made under request (consult conditions).

  • “Powersoft” Class D Amplification.
  • 24-bit DSP with 4 presets.
  • European Neodymium transducers.
  • 12 mm Birch Plywood.
  • Neutrik connectors.
  • Poliurea paint finish.
  • Horizontal and vertical pole mount.
ACOUSTICS
POWER HANDLING1 x 450 W @ 8Ω + 2 x 60 W @ 16 Ω
MAX POWER700W + 240W
IMPEDANCE1 x 8 Ω  /  2 x 16 Ω
COVERAGEHORIZONTAL 140º / VERTIVAL 15º
FRECUENCY RANGE80 Hz  – 20 Khz  +/- 3dB
SPL 1W/1MT95 dB
MAXIMUM SPL133 dB CONTINUOS – 139 dB PEAK
CROSS OVER
TYPEDSP CONTROLLED PRESET SPEAKERS
FREQUENCY75 KHz
TRANSDUCERS
 1 x 10” NEODUMIO + 2 x 1,75″ NEODIMIO
AUDIO INPUT
CONNECTORSMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1 = GROUND / PIN2 = HOT / PIN3 = COLD
AUDIO OUTPUT
CONNECTORMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
POWER INPUT
CONNECTOR1 X POWERCON IN  1x POWERCON LINK
AMPLIFIERS
TYPE1 MODULE CLASS D – DSP CONTROLLED
SUBWOOFER POWER2 x 700 WATT @ 8 Ω
PROTECTIONSDYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS
AC POWER
OPERATING RANGESTANDARD 90 – 265 Vac 50Hz (STANDARD)
MAX CONTINUOS AND BURST CURRENTSTANDARD 2A (>10SEC)
PHYSICAL
MEASURES54 x 31,2 x 19 cm
WEIGHT15 Kg

For any support or additional information, please go to our “Contact” section.

Photo gallery MAK10A

Similar Products