MAK12-V1A

MAK12-V1A is an active satellite speaker of long throw and high performance, designed for middle and big-size venues. It combines one 12” speaker with three 1,75” high frequency drivers mounted on wave-guides. “Powersoft” Class-D amplification and our DSP are guarantee of exceptional quality of the sound and power performance.

Our big size venues active speaker MAK12-V1A has very high size/power ratio. It is made of 15mm birch plywood, strong structure and low weight, considering its power (35kg).
It uses “Powersoft” Class-D amplification and our DSP with 4 different presets.
It’s easy to use and optimized to be utilized in conjunction with our IKS18 or MAKS series subwoofers forming powerful PA systems for middle and big size venues.
Also, thanks to its presets, this speaker could be used as floor monitor, drum fill, etc.…

ACOUSTICS
POWER HANDLING1.000W + 240W
MAX POWER1050W + 1050W
IMPEDANCE1 x 8 Ω + 3 x 8 Ω
COVERAGEH 120º V 20º
FRECUENCY RANGE100 Hz – 20 Khz +/- 3dB
SPL 1W/1MT127 dB ( low-mid ) 133 dB ( higt )
MAXIMUM SPL137 dB CONTINUOS – 143 dB PEAK
CROSS OVER
TYPEDSP CONTROLLED PRESET SPEAKERS
FREQUENCY1,2 KHz MINIMUM
TRANSDUCERS
LOW-MID FREQUENCY1 x 12” NEODYMIUM
HIGH FREQUENCY3 x 1,75” NEODYMIUM
AUDIO INPUT
CONNECTORSMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1 = GROUND / PIN2 = HOT / PIN3 = COLD
AUDIO OUTPUT
CONNECTORMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1+ = CH1+ / PIN1- = CH1- / PIN2+ =N.C. / PIN2- = N.C.
POWER INPUT
CONECTOR1x POWERCON IN  1x POWERCON OUTPUT
AMPLIFIERS
TYPE1 MODULE CLASS D – DSP CONTROLLED
POWER2 x 1050 WATT @ 8 CH
PROTECTIONSDYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS
AC POWER
OPERATING RANGESTANDARD 115 – 240 Vac 50Hz (STANDARD) / 300w
MAX CONTINUOS AND BURST CURRENTSTANDARD 12A (>10SEC) – 24A (>1 SEC )
PHYSICAL
DIMENSIONS75 x 35 x 22 cm
WEIGHT35 Kg  (77 lbs)

For any support or additional information, please go to our “Contact” section.

Similar Products