The MAK8A is designed for enterprises that look for an economical and very small system, but without losing the attitude of a large system. This MAK8A is composed by an 8″ speaker of 500W neodymium RMS and two 1″ compression motors. With proportion waveguide on a horizontal coverage of 110º and vertical coverage of 15º.
The MAK8A is a line array that weighs only 14 kg and has got a mount in its interior to connect a tripod or separator pole. The MAK8A can be used together with our subwoofers IkS18A, MAKS1A and MAKS2A, reaching maximum quality, minimum space and maximum rentability. The MAK8A is designed for small and medium events.
- “Powersoft” Class D Amplification.
- 24-bit DSP with 4 presets.
- European Neodymium transducers.
- 12 mm Birch Plywood.
- Neutrik connectors.
- Poliurea paint finish.
- 36 mm tripod / pole mount.
ACOUSTICS | |
POWER HANDLING | 1 x 500 W @ 8Ω + 2 x 40 W @ 8 Ω |
MAX POWER | 700 + 160 W |
IMPEDANCE | 1 x 8 Ω / 2 x 8 Ω |
COVERAGE | HORIZONTAL 110º / VERTICAL 15º |
FRECUENCY RANGE | 100 Hz – 18 Khz +/- 3dB |
SPL 1W/1MT | 95 dB |
MAXIMUM SPL | 133 dB CONTINUOS – 139 dB PEAK |
CROSS OVER | |
FREQUENCY | 100 KHz |
TRANSDUCERS | |
| 1 x 8” NEODIMIO + 2 x 1″ NEODIMIO |
AUDIO INPUT | |
CONNECTORS | 1x SPEAKON IN |
PHYSICAL | |
MEASURES | 50 x 28 x 19 cm |
WEIGHT | 14 Kg |
|
|
Similar Products
