MAKS1A is an active subwoofer based on 18” Neodymium speaker that delivers 1000W of power. Its small size and low weight makes it an ideal solution for wide variety of situations or a powerful partner to some of our satellite speakers like MAK3P, IKMH15, MAK10, MAK12…MAK

MAKS1A is an active subwoofer, powered by two channel “Powersoft” class-D amplifier of 1050W per channel and controlled by our DSP. Amplifier module is equipped with 4 different presets optimizing its sound for wide variety of applications.
It weights only 28 kg and its small size makes it very versatile.

  • PA systems.
  • Audio-Visual applications.
  • Concert Halls.
  • Disco-Bars and Discotheques.
  • Drum Fill and Side Fill systems.
ACOUSTICS
POWER HANDLING 1000w (SUB) + 1000w (SUB)
MAXIMUM AMPLIFIER POWER 1050w (SUB) + 1050w (SUB)
OPERATING FREQUENCY RANGE 30 Hz – 150 KHz +/- 3dB
MAXIMUM SPL 127 dB CONTINUOS – 133 dB PEAK
SPL 1W / 1 MT 100 dB ( SUB )
CROSSOVER
TYPE DSP CONTROLLED PRESET RELATING
FREQUENCY 150 Hz
TRANSDUCERS
LOW FREQUENCY 1 x 18″ NEODYMIUM
AUDIO INPUT
CONNECTORS MALE + FEMALE PARALLEL 3-PIN BALANCED XLR
WIRING PIN1=GROUND / PIN2=HOT (+) / PIN3=COLD (-)
CONNECTOR FEMALE SPEAKON
WRING PIN1+ = CH1+ / PIN1- = CH1- / PIN2+ = N.C. / / PIN2-= N.C.
POWER INPUT
CONNECTORS 1 x POWERCON IN
AMPLIFIERS
TYPE 1 MODULE CLASS D – DSP CONTROLLED
POWER 1000w x 2 CHANNELS @ 8 Ω
PROTECTIONS DYNAMIC LIMITER, OVER CURRET, OVER TEM, SHORT CIRCUIT
AC POWER
OPERATING RANGE 90 – 264 Vca 50Hz (DEFAULT)
MAX CONTINUOS AND BURST CURRENT DEFAULT 6A (>10sec ) – 12A (<1sec )
PHYSICAL
DIMENSIONS 50 x 50 x 55,7 cm
WEIGHT 28 Kg

For any support or additional information, please go to our “Contact” section.