MAKS1A 3.0 is an active subwoofer based on 18” Neodymium speaker with programmable onboard DSP
The MAKS1A 3.0 is a powered 18″ subwoofer with programmable onboard DSP. It has in- and outputs for creating a wide array of speaker configurations. The amplifier mounted on board is class D, delivering 2x 1.100W at 8 Ohms / 1.600W at 4 Ohms, with a max.THD of 1% (EIAJ test @ 1kHz).
The MAKS1A 3.0 features a button to select your four presets. It also has two speakon outputs for connecting a wide array of passive speakers including mid-high models (MAK3P, MAK5P, MAK8P, MAK10P, FORCE H108P or additional passive subwoofers (MAKS1P))
In order to optimise performance, the on-board DSP includes up to 4 programmed presets. It has 3 volumes, one for general control, another for subwoofer control and another for satellite control.
The unique four-corner port configuration provides symmetrical back loading to the speakers, for extended bass response with very low distortion. The port configuration also provides incredible structural strength to the cabinet, despite its light weight.
Pocket handles and a M20 thread mount position for attaching mid-high speakers make the subwoofer convenient to use and ideal for medium throw applications in theatres, concert venues and audio / video installations.
All MAKS components are designed by UNKA SOUND and custom made under the UNKA SOUND quality control.
- PA systems.
- Audio-Visual applications.
- Concert Halls.
- Disco-Bars and Discotheques.
- Drum Fill and Side Fill systems.
|POWER HANDLING||1000w (SUB) + 1000w (SUB)|
|MAXIMUM AMPLIFIER POWER||1050w (SUB) + 1050w (SUB)|
|OPERATING FREQUENCY RANGE||30 Hz – 150 KHz +/- 3dB|
|MAXIMUM SPL||127 dB CONTINUOS – 133 dB PEAK|
|SPL 1W / 1 MT||100 dB ( SUB )|
|TYPE||DSP CONTROLLED PRESET RELATING|
|LOW FREQUENCY||1 x 18″ NEODYMIUM|
|CONNECTORS||MALE + FEMALE PARALLEL 3-PIN BALANCED XLR|
|WIRING||PIN1=GROUND / PIN2=HOT (+) / PIN3=COLD (-)|
|WRING||PIN1+ = CH1+ / PIN1- = CH1- / PIN2+ = N.C. / / PIN2-= N.C.|
|CONNECTORS||1 x POWERCON IN|
|TYPE||1 MODULE CLASS D – DSP CONTROLLED|
|POWER||1000w x 2 CHANNELS @ 8 Ω|
|PROTECTIONS||DYNAMIC LIMITER, OVER CURRET, OVER TEM, SHORT CIRCUIT|
|OPERATING RANGE||90 – 264 Vca 50Hz (DEFAULT)|
|MAX CONTINUOS AND BURST CURRENT||DEFAULT 6A (>10sec ) – 12A (<1sec )|
|DIMENSIONS||50 x 50 x 55,7 cm|