MAKS2A is an active subwoofer based on double 18” speaker (1200W rms each), incorporating “Powersoft” 4-channel class-D amplifier, controlled by our 24-bit DSP. Four selectable presets are enabling its use in wide variety of applications.

MAKS2A is an active subwoofer, powered by four channel “Powersoft” class-D amplifier and controlled by our DSP. Amplifier module is equipped with 4 different presets optimizing its sound for wide variety of applications.
It robust design and high performance makes it very versatile. It could be used in fixed installations as well as a part of touring system.

  • “Powersoft” power Amplifier, Class-D, 8KW.
  • 24-bit DSP with 4 selectable presets.
  • European-made 18” transducers personalized for UNKA SOUND.
  • Neutrik NL-4 and PowerCon connectors.
  • Poliurea paint Finish.
  • 8 handles and 36mm pole mount.
ACOUSTICS
POWER HANDLING1.200W x 1.200W
MAX POWER2 x 3.000W
IMPEDANCE2 x 8 Ω
COVERAGEOMNI HORIZONTAL / VERTICAL
FREQUENCY RANGE30 Hz – 150 KHz +/- 3dB
SPL 1W / 1 MT98 dB
MAXIMUM SPL134 dB CONTINUOS – 140 dB PEAK
CROSS OVER
TYPEDSP CONTROLLED PRESET SPEAKERS
FREQUENCY150 Hz
TRANSDUCERS
LOW FREQUENCY2 x 18” FERRITA
AUDIO INPUT
CONNECTORSMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1=GROUND / PIN2=HOT / PIN3=COLD
AUDIO OUTPUT
CONNECTORMALE + FEMALE PARALLEL 3 POLES BALANCED XLR
WIRINGPIN1+=CH1+ / PIN1-=CH1- / PIN2+=n.C / PIN2-=N.C.
POWER INPUT
CONNECTOR1x POWERCON IN / 1x POWERCON LINK
AMPLIFIERS
TYPE1 MODULE CLASS D – DSP CONTROLLED
SUBWOOFER POWER3.000 WATT x 2 CH
PROTECTIONSDYNAMIC LIMITER, OVER CURRENT, OVER TEMP, SHORT CIRCUITS
AC POWER
OPERATING RANGEStandard 210- 240 Vac 50Hz (Standard) / 600W
MAX CONTINUOS AND BURST CURRENTStandard 12A (>10 SEC) – 24A (>1 SEC)
PHYSICAL
MEASURES112 x 56 x 81 cm
WEIGHT85 Kg

For any support or additional information, please go to our “Contact” section.